What is what to do when washer is full of water?

Okay, here's information on what to do when your washing machine is full of water, in markdown format with the requested links:

When your washing machine is full of water and won't drain, it's a common problem that can be caused by a few different issues. Here's a breakdown of what to do:

1. Safety First: Immediately unplug the washing machine from the power outlet. This prevents electric shock while you troubleshoot.

2. Stop the Cycle: If possible, cancel or stop the current wash cycle. If the control panel is unresponsive, you'll need to proceed manually.

3. Check the Drain Hose:

   • Kinks or Obstructions: The <a href="https://www.wikiwhat.page/kavramlar/Drain%20Hose">drain hose</a> is the flexible pipe that carries water from the washer to your drainpipe. Check for any kinks, bends, or obstructions that might be blocking the water flow. Straighten the hose and remove any visible blockages.
   • Proper Height: Ensure the drain hose isn't pushed too far down into the drainpipe. This can create a siphoning effect that prevents proper drainage. There is usually a recommended height by manufacturer.

4. Check the Drainpipe:

   • Clogs: The <a href="https://www.wikiwhat.page/kavramlar/Drainpipe">drainpipe</a> itself may be clogged. You can try using a plumbing snake or auger to clear any obstructions.
   • Airflow: Make sure the drainpipe has adequate airflow. If it's sealed too tightly, it can create a vacuum and prevent drainage.

5. Clean the Drain Pump Filter: Most washing machines have a <a href="https://www.wikiwhat.page/kavramlar/Drain%20Pump%20Filter">drain pump filter</a> designed to catch lint, debris, and small objects that could clog the pump.

   • Location: The filter is usually located at the front of the machine, near the bottom. Refer to your owner's manual for the exact location.
   • Access: You'll typically need to remove a small access panel. Be prepared for some water to spill out, so have a container and towels ready.
   • Cleaning: Remove the filter and clean it thoroughly under running water. Remove any lint, hair, or other debris.

6. Check the Lid Switch/Door Lock:

   • If the <a href="https://www.wikiwhat.page/kavramlar/Lid%20Switch">lid switch</a> (on top-load washers) or door lock (on front-load washers) is faulty, it may prevent the washer from spinning and draining. These switches are safety mechanisms that prevent the machine from operating with the lid or door open. If you suspect a faulty switch, you may need to have it tested and replaced by a professional.

7. Consider a Siphon: If you absolutely cannot get the water to drain, you can use a siphon hose to manually drain the water into a bucket. Be prepared for a lot of water, and this can be time-consuming.

8. Call a Professional: If you've tried all of the above steps and the washer still won't drain, it's time to call a qualified appliance repair technician. The problem could be a faulty drain pump, a malfunctioning control board, or a more complex issue that requires professional diagnosis and repair.